Environmental issues

This is a step by step guide for an easy way to install attic insulation in your home. There are two types of insulation for attics, the first being very hard to install and must be done by a professional installer and is called loose fill. For a simple do it yourself installation of your attic insulation it is recommended to use the blanket form, which can be sold in rolls or batts.

Rolls of insulation normally come in all different sizes between sixteen and twenty four inches and are sized to fit in between joists and studs. Batts are sold in flat packs and are normally about eight feet long in size. Both are made up by either fiberglass or mineral fibers.

Before buying your insulation it is highly recommended to measure your attic and the buy a little bit more than needed just in case, unopened packs can always be sent back to the shop. By measuring before you can also see what type of insulation is better for your attic space. Buying a cover for your insulation will stop any damage or condensation to your insulation. Brown Kraft paper or fire-retardant foils are two very good choices.

The installation itself is a very simple process that can be fully completed in just a few days if done effectively and properly. Always start at one side of the attic and weigh down the joists, if they are open, with either a heavy object or your feet. Place or unroll the insulation slabs making sure they are in the joists. Knock down the ends with care so that the insulation slab will not split. Cut away any edges that overlap, using the utility knife. Make sure any wires are uncovered so that they will not short circuit in the future.

Remember to have all the necessary utilities before you start work on installing the insulation. These utilities include gloves, filter mask, utility knife, measuring tape, glasses and long sleeve shirts and trousers to avoid any irritation the insulation may cause.

Tags: attic conversion, attic improvement, Attic insulation, attic ventilation, energy conservation, foam insulation, heating, Home Improvement, house insulation, insulate the attic, insulation, roof insulation, roof padding, save energy, spray insulation
Filed under: energy conservation