Attic insulation can be very simple to do yourself if you know what you are doing. First of all know what type of insulation is best for your attic. Either slabs of insulation called batts or rolls of insulation. Loose fill is another type but it has to be installed by a professional as the process is more complicated that the others.

Foam insulation is one of the most effective forms of insulation, a bit more expensive than the rest, but also one of the longest lasting and higher in R-value than the other insulation methods. It is recommended that foam insulation must be installed by a professional, as the procedure can be quite difficult for someone new to this procedure.

Foam insulation comes in two types. The first is open celled foam, foam that is less compressed and holds a lot of air bubbles, because of this it can be removed very simply removed. The second is closed cell foams, foam that is very dense and compressed and hardly holds any air at all, this foam is a lot harder and is higher in R value and can’t be removed easily.

Installing attic insulation is a very simple job that one person can complete in the space of a weekend if fitted in a proper manner. Start at one end of the attic, making sure you put weight onto open joists. Start placing the batts or unroll the insulation between the joists. Butt down the rolls making sure not to butt them very hard as not to damage the insulation, the same is done with the batts. Use the utility knife to cut away remaining fibers and any areas that touch electrical items as not to cause a fire.

Before beginning the installation of your attic insulation, make sure you have all of the utilities needed. Long gloves, respirator, knife, goggles or glasses, and long sleeved clothes and pants are some of the necessary utilities to prevent irritation that the fiberglass can cause.